PA815-DF

Heavy Duty with Automatic Down Force Assistance for In-Line, Lever-Permit Air Drivers

See PA815-DF in Action

  Product Sheet for PA815-DF
  Owners Manual
  Unique Mounting Ideas
  3 Year Limited Warranty

Torque Range: 0-800 in-lbs (90 Nm)
Tool Weight: 0-15 lbs. (6.75 kg)
Down Force: 0-25 lbs. @ 100 psi
Max Reach: 34 3/4 inches (883 mm)
Min Reach: 12 3/4 inches (324 mm)
Supply Hose: Braided Polyurethane 3/8” ID
Air Requirements: filtered, dry air 100 psi.
Shipping Weight: 30 lbs
Tool Connection: 1/4” NPT
(If your tool requires lubrication – add to air line after DF controls.)

This ETA arm provides Down Force Assistance (also called Power Assist) while tool spindle is turning. This arm is ideal for self-threading fasteners and self-drilling fasteners.

Onboard Down-Force-Logic senses when air motor is turning and changes direction of float cylinder so that it pulls arm downward, lessening or eliminating force required by operator to drive fastener.

As soon as tool shuts off, the float mode resumes, allowing operator to float arm away from the driven fastener. Amount of down force applied and reaction time of applied force are adjustable. Down-Force-Logic is self-contained; therefore no air tool modification is required.

CAUTION - While this arm will function the same with any in-line, pneumatic driver, it is recommended that this model be USED WITH LEVER-PERMIT (Lever + Push to Start) DRIVERS ONLY. See PA815-DF Owner’s Manual for Safety Information.

Please read the Owner’s Manual and comply with safety information in the manual before using this tool arm.